Topo Designs Rover Pack Review

Introduction

IMG_20160227_231012

Topo Designs is a outdoor gear company based in Colorado. All of their products are designed and constructed by themselves in Colorado. While their most famous bag is the Klettersack, when I was in the market for a backpack, I instantly fell in love with the Rover Pack. After a few months of use with my Red and Blue model, they produced a limited edition with the English company TSPTR, which I eventually purchased as well. It’s an amazing bag with a few flaws that don’t hinder its usefulness to me. However, this bag will falter when put to certain tests.

Specs

Dimensions: 18″h x 11″w x 5″d
Volume: 16.2 L
Price: $139 (basic editions), $159 (limited editions)

Packaging

The bag comes with a simple tag with the Topo Designs logo on one side and a short blurb on the company. Other than that, packaging was minimal.

Design

 

The bag features a main compartment with a laptop sleeve. On newer models, the laptop sleeve divider has a flat zippered compartment. There is a flap that covers over the opening of this compartment and is held down with two buckles. The flap has a small zippered compartment for small items. On each side of the main compartment, there are two bottle holders. On the front of the main compartment, there is another flat zippered compartment. There are D-rings on both shoulder straps that can be used to hold gear and other accessories. I often hook my watch to the left D-ring.

The TSPTR limited edition model has a snoopy theme. There are five patches spread about the bag. Overall, I would say that the color scheme of the bag, brown and tan, work as a good background for the patches. The red paracord act as a nice contracting detail.

Fit and Finish

The bag is handmade and, as such, the stitching is noticeably uneven at times. It is most apparent where the stitching ends. However, they are not visible from the outside of the bag and, honestly, the touch of imperfection adds a personal touch. I have no fear that the bag will fail at its stitches.

IMG_20160227_231114

The bag itself is made of 1000d Cordura fabric (spec sheet). The material is tear resistant and quite resistant to fraying. While it is stated that the bag comes coated, from experience, the bag is not very water resistant. This is not a big issue as it does not claim that it is, although it would have been a useful feature. In email correspondence with Topo, they recommended using Nikwax Tent Spray to waterproof the bag.

The bag cinches closed using 550 Paracord. The ends are singed and knotted. I often hold the bag by the paracord and have not had any problems with the stitching around the paracord.

It would appear as though the should strap padding got thicker in later models of the backpack. My TSPTR Rover Pack has straps that are almost twice as thick as my original red and blue model.

Functionality

I use this backpack as a day pack. As a student, I regularly carry a laptop (I have an XPS 15 9550 and it fits quite snug), notebooks, pen roll and occasional textbook. Water bottles can be a tight squeeze depending on the shape of the bottle. This is because the water bottle pouch is flat with the side of the bag. As such, larger water bottles will diminish the interior space of the bag.IMG_20160228_164342

The flap with buckles is useful for holding a jacket by simply clipping the jacket in between the flap and the bag. This can be done even when the bag is full.

IMG_20160227_231038

As previously stated, the strap padding got thicker with later models. The thicker padding makes a big difference when the backpack is heavy. I much prefer to use my TSPTR bag when I am carrying my laptop.

The bag is not a jack of all trades. While it is very portable and has much to offer for its size, its small size prohibits its use for carrying larger items. For example, it starts to struggle with more than two full size textbooks. I have used the bag for camping really had to pick and choose what items I was going to bring.

Conclusion

Topo Designs has created an great bag for everyday use, if you don’t have to carry a lot. I comfortably chuck my school supplies in and it holds itself quite well. I don’t have to baby it or worry about where I put it down. It looks and works as well after 1 year as it did on day 1. However, if you need to carry larger or heavier gear, I would recommend getting a different bag. For me, though, this bag is just what I need.

Toru Yamashita Whale Knife Review

IntroductionIMG_20160128_232308

I first saw the Toru Yamashita Whale Knife on the internet and thought it was a joke. It looked a bit “whimpy” (albeit “cool”). However, after holding the knife in person and reading about the specs, I was blown away. Today, let’s take a look at a whale knife.

Specs

Material: White Steel (core), Blue Steel (outside)
Country of Manufacture: Japan
Maker: Toru Yamashita

Packaging

The knife came slabbed between two pieces of cardboard. Threw it away pretty much when I got it.

Fit and FinishIMG_20160128_232456

The knife is blued along the edges. Though it does add some cosmetic value (if that’s your taste), it seems to do an all right job of preventing oxidation.

The steel is heat treated very well. It came with a hair splitting edge and I can touch it up easily with a leather strop or with my Opinel natural sharpening stone (review to come) if needed. Furthermore, the steel lamination is done very symmetrically and the bevels are also very nice.

The handle area is stamped on both sides “TOBA” with some waves. I have not yet found what “TOBA” means, but it is stamped on all of his knives.

FunctionalityIMG_20160128_232325

I would describe this knife as sharp. Very sharp. Although there is no information on the composition of the White Steel that is used in the core of the knife, most “white steels” are high carbon steels. Upon receiving the knife, I brushed my thumb against the edge and subsequently received a cut that would not stop for a good 10 minutes.

I bought the knife to sharpen pencils with and it does its job quite well. It’ll slide right through the wood and come out the other end. When freshly sharpened, the wood gives little resistance.

I have two issues with the knife:
1) With a convex grind, the edge bends and develops a burr when cutting objects harder than wood.
2) The steel is very prone to rusting. Although I keep the knife dry and give it a light coating of oil every time I put it away for a longer period, some rust marks have appeared (black circles). I have identified a scratch on the blade that I haven’t been able to identify. It would appear as though the scratch went through the lamination although I am not sure.

IMG_20160128_232447

Conclusion

My random web browsing find turned into a physical purchase that I do not regret. The blade is quite useful as a utility tool and it gets much use (as apparent by the wear). It is, however, not pocket worthy. Beyond a basic office tool, this knife has little use. It is too fragile and requires too much care. For now, it’ll stay on my desk and remain an occasional pencil sharpening utensil. IMG_20160128_232431

Mitsubishi White Pencil Review

IntroductionIMG_20160224_231123

I initially saw this pencil online and thought nothing much of it. It’s so plain and simple and seems like one of those “souvenir” or “kids” pencils. However, after seeing guy in person, I knew I had to have it. It’s too bad I didn’t realize how amazing it is. It’s impossible to find them nowadays.*

*Do leave me a message if you know a source for them. You’ll be well rewarded. I promise.

Specs

Place of Manufacture: Japan (?)
Price: 30NTD (~$1)

Background

I bought this pencil at a store in Taiwan called Plain (no affiliation: they have better pictures than I do). They weren’t individually packaged, although they did come with transparent pencil caps. I am not sure whether or not these came from Mitsubishi or if the store owner put them on himself.IMG_20160224_231152

In correspondence with a fellow pencil enthusiasts, I learned that the pencil was also produced in grey. Another spoke of how they also purchased one in Japan. I believe that the pencil was an Asia limited edition in 2014.

Fit and FinishIMG_20160224_231100

The pencil has great fit and finish. I cannot find any issue with the paint (albeit it is only white). The logo at the end of the pencil appears to be either foil or metallic paint. On my particular example, it seems like the logo might be wearing off a bit.

IMG_20160224_231018The pencil came pre-sharpened at a larger angle. The plastic pencil cap that protects the tip has created dents in the hexagonal body. I don’t believe I had capped/uncapped the pencil enough times to cause the damage myself, so it believe it was caused when the pencil cap was initially pushed on. I have since left the pencil uncapped.

Functionality

The pencil is stated to be of hardness HB although my writing experience (as well as that of the owner of Plain) has found it to be closer to B. The tip does not wear quickly and, in many ways, it writes very similarly to the Hi-Uni.

I don’t write with it too often, but here’s a brief writing and erasing sample.

IMG_20160224_231423

ConclusionIMG_20160224_232850

This pencil means a lot to me. It sparked a weird fetish of mine for white pencils and I continue to search for pencils of the sort. This is a pencil for the collection and it sits with my EF Blackwings in a nice padded box. Until I can find more, if possible, that’s where it’ll live.

Eberhard Faber Blackwing 602 (Vintage) Review

Introduction

IMG_20160126_214139

I’ve been a fan of wooden pencils for a while, so when an opportunity fell into my lap to try out a legendary pencil at a fraction of the price for a brand new unsharpened one, I jumped at it. Here, we’ll be discussing the original Eberhard Faber Blackwing 602. A comparison between this pencil and its remake, the Palomino Blackwing 602, can be found here.

Specs

Date manufactured: 1950s-1970s (my guess is that this particular example was made in the 1960s)
Price: $50-60 (New), $20-30 (Used, depends on length)

Fit and Finish

12636827_794968853964061_946472443_o

Pencil has a beautiful charcoal colored lacquer with gold lettering spelling out the iconic “Half the Pressure, Twice the Speed”. Due to age, it appears as though the paint has started to crack down the middle. I would assume that it is cracking where the two halves of the barrel were connected together.

The eraser is held in place with the distinct ferrule. It is easy to replace the eraser if you so wish. Palomino sells many different colored replacement erasers or you can cut one out of your favorite eraser.

Functionality

IMG_20160126_215441

The lead is super smooth. There’s a tad of feedback, although none that could be called scratchy. The lead wears done quickly when sharp, so line variation can vary mid-sentence unless you rotate the pencil. However, writing on a dull point seems to alleviate the problem.

The stock eraser test was done out of pure curiosity. Being a vintage pencil, the eraser has surely somewhat dried out so it’s effectiveness has probably been diminished.

Closeups of each section of the writing test are available below.

Conclusion

The pencil has a writing experience second to none. I regularly use Mitsubishi Hi-Uni’s and 9800’s, but they don’t feel as nice as the Blackwing. It’s hard to describe the combination of smoothness and feedback, but it makes it a joy to write with. Plus, the line it puts down is just a joy to look at. While the price of a new pencil may be a bit steep (and it can be a bit hard to start sharpening a brand new one), a used Blackwing 602 is much more affordable and is a great gateway to experience this legendary pencil.

Mitsubishi 9800 Review

IMG_20160215_214248Introduction

I’m just going to put it out there: the Mitsubishi 9800 is my favorite production everyday use pencil of all time. I’m not going to say it is better than a Hi-Uni or Swiss Wood or vintage Blackwing, but for the normal workday (or school day), this pencil excels.

Specs

Place of Manufacture: Japan
Price: $7-8 for a box of 12

Packaging

When purchased in a box of 12, you get a nice vintage looking box.

Fit and Finish

IMG_20160215_214346

The pencils have relatively good fit and finish. The paint is consistent and the gold foil is crisp. The quality of the wood is not always the same. Some halves are darker than the others. While it makes no effect with the writing experience or sharpening, it can be a bit of an eyesore. The leads are well centered.

Around the ends, there are times when the edges have chipped paint. I would guess that it occurred either from cutting the wood or when the pencils were being packaged. Once again, it’s not much of a functional issue, but it does affect the aesthetics.

Design

The pencil features a no-nonsense design. There is gold lettering featuring the company name, model and lead hardness. There is no eraser.

FunctionalityIMG_20160215_214419

I love this pencil because of its workhorse abilities. The pencil is light and well balanced because of the lack of ferrule and eraser. One can sharpen it from both ends for long, uninterrupted writing sessions.

The pencil comes in many different lead hardness grades (is that a word?) including HB, B, 2B, F, H, and 2H. I personally like the HB and B grades. The B grade gives a much darker line than the HB grade while the 2B wears down super quickly. Furthermore, the 2B smears very easily. With decent pressure, the HB gives

 

Conclusion

I use this guy for everything. It’s not supposed to be a safe-queen and you shouldn’t treat it as one. I love it because it’s cheap and reliable. If I could have one pencil in the world, I’d choose a Mitsubishi 9800.

Rotring 600 0.5mm Review

IntroductionIMG_20160127_232013

When one talks about premium mechanical pencils, there are usually two ways the conversation can go: luxury or drafting. Here, we discuss one of the most common drafting pencils. The Rotring 600 has been around for a while (still researching its history) though its newest version began in the 1990s with Rotring having been bought out by Sanford. It has a very fragile tip that many new users have bent beyond repair and a price that is way above similar Pilot and Uni offerings. So, how does Rotring stand up to the lore it carries?

Specs

Lead size: 0.35mm (effectively 0.3mm), 0.5mm, 0.7mm, 0.9mm
Country of Manufacture: Japan
Price: $50 (Retail), $20-25 (Amazon)

Packaging

The Rotring comes in a lackluster cardboard box. While the Midori Pen Case also came in a cardboard box, the Rotring’s feels noticeably cheaper. Inside, there is a cardboard divider forcing the pencil into a snug corner. The pencil is sheathed in a plastic bag which it can easily slip out of (which can give a scare to the one opening the packaging). On the other side of the divider, there is a small information pamphlet that provides some general use tips and warranty information.

Fit and Finish

Upon holding the pencil, the first reaction most people have is “this is so heavy” and it’s true. At around 20 grams (more accurate number to come), the pencil is much heavier than store bought Bic mechanical pencils.

Taking the pencil apart, one finds that there is a minimum of plastic components. I’ve done some research on the history of the pencil to find out that the internal mechanism used to be completely metal. However, the plastic in the pencil does not feel weak and I do not fear that it will fail to work anytime soon.IMG_20160127_232325

Functionality

Holding the pencil is a joy. The knurled grip provides a wonderful surface to hold. The Alvin Draft-Matic (a similar pencil based on the Rotring 500) has a sharper grip that can be painful to hold for long periods.IMG_20160127_232229

The mechanism seems to take any type of lead. I have fed HB, B, and 2B leads from different manufactures and no single brand seems to break more often. As a matter of fact, even though it has a thin tip, lead breakages are seldom and are mostly from user error.IMG_20160127_232409

The thin tip is an area of concern. Having seen many pictures of the result of fallen pencils (most should be marked “nsfw”), when I bought the pencil, I immediately dug up an old tin pencil case from my childhood to protect the pencil when I took it from my desk. It has since been replaced with a Midori Pen Case.IMG_20160127_232503

I have not used the eraser although I will note that it is about the same size as Pilot P20x series pencil erasers. It feels like it is on the dry side.IMG_20160127_232119

 

Conclusion

The Rotring 600 is a wonderful pencil. It is easy to write with it for long periods of time and it is very robust, sans the tip. This is one for the pocket.

Midori Brass Pen Case Review

originally published 1/26/2016
last edited and revised: 8/3/2016

IntroductionIMG_20160126_140625

Among my most prized stationery possessions is my Midori Brass Pen Case. It’s a little hefty, has some sharp edges, and doesn’t hold the most, but it has built a personal connection with me, during the time that I’ve owned it, that gives it a special place in my collection.

Check out my current EDC rotation to see how it fits in with everything else.

Specifications

Dimensions: 5cm (width) x 17cm (length) x 1.8cm (height)
Weight: Around 160g
Place of Manufacture: Japan
Price: $76 (retail), $30-50 (street)

Packaging

IMG_20160126_140818

The pen case comes in a nice cardboard box made of two halves. They are well fitted, albeit on the loose side. The top of the box has black lettering that is imprinted into the cardboard. The words are sharp and legible. The text itself is in both Japanese and English.

English text: “The appearance of Brass brings you back old memories and fascinates you deeply. Long time use changes the material quality, turning it into a precious tool.”

IMG_20160515_224401

Inside, the pen case is wrapped with with a paper sleeve. The sleeve unfolds with some instructions on the inside. It is written in Japanese, so I am unable to read what is written.

Fit and Finish

IMG_20160224_194645

The pen case is built very sturdily. There is very little flex when bending the lid and practically none with the base. The two halves fit together very well although there is a bit of wiggle room when the lid is attached. I assume that if the tolerances were any closer, it would be much harder to place the lid on.

The issue with the pen case are the sharp edges. Both the top and bottom halves are made of one piece of brass and, as such, the top and bottom edges are rounded and smooth to the touch. However, the open edge is extremely sharp. It would appear as though there was no finishing done to the edge after the metal was cut. While not sharp enough to cut one’s skin, it is uncomfortable to brush your hand up against it. It has somewhat smoothed out with use though.

FunctionalityIMG_20160126_140739

The pen case does not have a large capacity. When considering length, it is not long enough to hold an unsharpened or newly sharpened pencil. With length and width, one can stack around 8 pencils.

I usually keep:

  • Rotring 600 0,5 mechanical pencil
  • Staedtler Mars plastic push eraser
  • Mitsubishi Hi-Uni 0.5 HB pencil lead

The items do rattle and there are a fair number of scratches from the knurled grip of the Rotring.

If I want to bring woodcased pencils out, I have to select pencils that are short enough to fit. However, it will comfortably hold 2-3 with a small eraser and a single hold sharpener.

I was initially concerned about possibly denting the pencil case when I brought it out. The case is quite thick, but as a student, there are many opportunities for my backpack to be bumped into and stepped on. I recently saw a dent in one of the corners of the case.

IMG_20160224_194514

It is not very obvious, but it just goes to show that the case is not bulletproof and is subject to damage.

I was surprised when I figured out that the pen case fit almost perfectly in the largest slot of my Pilot pen roll (Item number PCS121-80.). Since then, whenever I bring the Midori pen case out, I stuff it in the pen roll and throw it into my bag.

Conclusion

I love this pen(cil) case. There’s no doubt that Midori has produced a well made, durable container that will serve me well. I don’t see how it can ever be damaged to the point of not being usable (sans extreme destruction). I will definitely be keeping it and using it for years to come.

IMG_20160224_194558